![]() Hamburger maintained that finishing the stabilization was the best way to prevent the tower from reaching that terminus, and work is ongoing at the time of writing. (Residents have already complained about odors from the voids formed between the building’s structure and curtain wall, cracks in the basement, and possible seismic stability given the shift.) If the tower reaches a tilt of 40 inches from its base position, as it would in only about 5 years at the current rate, the building’s elevators and plumbing could cease operation. With or without work underway at the site, Hamburger said, the tower continues to sink half-an-inch every year and tilt 3 inches. At that same meeting, project engineer Ron Hamburger admitted that the team didn’t provide any guidance to its contractor, Shimmick Construction, on how to install the piles or mitigate the impacts of drilling. In a public hearing on January 6, City Supervisor Aaron Peskin gave an update to the public about the project’s status. Although construction started up again and is still ongoing, monitoring data accrued from last year has revealed that the building sank an additional 2 inches and tilted another 10 inches during that period. The tower is sinking along with the sidewalk and street. Unfortunately, while the plan was approved and enacted, work had to be halted last August as it was discovered that the sinking had intensified even with stabilization underway. The Millennium Tower has sunk approximately 17 inches (as of July 2017) and is tilting to the southwest. Simpson Gumpertz & Heger called for 52 new concrete-and-steel piles to be drilled 250 feet into the bedrock below, which would alleviate compressive force on the northern corner of the site and stop both the tilt and sinking. Whatever the cause, the stabilization plan was intended to course correct the tower, which has tilted 26 inches west at the top since its opening. (Courtesy Millennium Towers Homeowners Association) The Perimeter Pile Upgrade includes the drilling of 52 new steel-and-concrete piles along two elevations. This isn’t an uncommon construction method in the Bay Area (and sections of downtown San Francisco are sinking at about three-quarters of an inch every year) and the Millennium Tower design team still maintains that the building’s issues stem from soil compaction caused by the construction of the adjacent Salesforce Tower. Newly released monitoring data shows that San Francisco's Millennium Tower tilted a quarter inch during the four days it took to install the. The issue stems from the building’s foundations-it sits on a 10-foot-thick concrete pad that it itself is supported by nearly 1,000 reinforced concrete piles driven 90 feet into soft clay. The 645-foot-tall, 58-story tower was completed in 2009 and has been tilting and sinking ever since it opened. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |